dc.identifier.uri |
http://dx.doi.org/10.15488/10469 |
|
dc.identifier.uri |
https://www.repo.uni-hannover.de/handle/123456789/10545 |
|
dc.contributor.author |
Böß, Volker
|
|
dc.contributor.author |
Rust, Felix
|
|
dc.contributor.author |
Dittrich, Marc-Andre
|
|
dc.contributor.author |
Denkena, Berend
|
|
dc.date.accessioned |
2021-03-02T10:17:48Z |
|
dc.date.available |
2021-03-02T10:17:48Z |
|
dc.date.issued |
2019 |
|
dc.identifier.citation |
Böß, V.; Rust, F.; Dittrich, M.-A.; Denkena, B.: Compensation of part distortion in process design for re-contouring processes. In: Procedia CIRP 81 (2019), S. 820-825. DOI: https://doi.org/10.1016/j.procir.2019.03.206 |
|
dc.description.abstract |
The repair of compressor blades requires a precise coordination of the material deposit and the subsequent re-contouring process. Since re-contouring is the last step in the process chain, it is a crucial stage for the final part quality and shape. Therefore, machining-induced part distortions must be considered in process design. This paper introduces a method for the simulation-based compensation of part distortions. The method combines process planning and evaluation by means of a geometric simulation. In order to validate the approach, milling experiments are carried out. A subsequent measurement of the part geometry shows that the part distortion can be reduced by up to 21% using the presented approach. © 2019 The Authors. Published by Elsevier Ltd. |
eng |
dc.language.iso |
eng |
|
dc.publisher |
Amsterdam : Elsevier B.V. |
|
dc.relation.ispartofseries |
Procedia CIRP 81 (2019) |
|
dc.rights |
CC BY-NC-ND 4.0 Unported |
|
dc.rights.uri |
https://creativecommons.org/licenses/by-nc-nd/4.0/ |
|
dc.subject |
Adaptive manufacturing |
eng |
dc.subject |
Blade repair |
eng |
dc.subject |
Milling |
eng |
dc.subject |
Part distortion |
eng |
dc.subject.classification |
Konferenzschrift |
ger |
dc.subject.ddc |
600 | Technik
|
ger |
dc.subject.ddc |
670 | Industrielle und handwerkliche Fertigung
|
ger |
dc.title |
Compensation of part distortion in process design for re-contouring processes |
|
dc.type |
Article |
|
dc.type |
Text |
|
dc.relation.essn |
2212-8271 |
|
dc.relation.doi |
https://doi.org/10.1016/j.procir.2019.03.206 |
|
dc.bibliographicCitation.volume |
81 |
|
dc.bibliographicCitation.firstPage |
820 |
|
dc.bibliographicCitation.lastPage |
825 |
|
dc.description.version |
publishedVersion |
|
tib.accessRights |
frei zug�nglich |
|