Ullmann, B.; Reifenrath, J.; Seitz, J.-M.; Bormann, D.; Meyer-Lindenberg, A.: Influence of the grain size on the in vivo degradation behaviour of the magnesium alloy LAE442. In: Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine 227 (2013), Nr. 3, S. 317-326. DOI: https://doi.org/10.1177/0954411912471495
Abstract: | |
The aim of this study was to investigate the differences in the in vivo degradation behaviour of magnesium implants with various grain sizes and damaged surfaces. For this purpose, three different LAE442 magnesium implants were produced: cast, single and double extruded implants, in order to obtain different grain sizes. Furthermore, defects were positioned on the surfaces of some of the single extruded implants. The initial stability was determined. Four pins of each implant material were implanted into rabbits' tibiae and regularly clinically, radiologically and μ-computed tomographically investigated over a period of 27 weeks. Following explantation, investigations were carried out using stereo and scanning electron microscopy including energy-dispersive X-ray analyses. Weight and strength changes were measured. The double extruded implants possessing the finest grains exhibited the highest initial stability (179.18 N). These implants demonstrated the lowest in vivo corrosion rates (0.0134 mm/year) and the least radiologically visible changes. The highest corrosion rate was computed for the implants possessing damaged surfaces. Radiologically discernible bone changes occurred at almost the same time as implant changes for all groups. Based on these results, the aim should be to produce fine-grained magnesium-based alloys for resorbable implants and to avoid any surface damage. © IMechE 2013. | |
License of this version: | Es gilt deutsches Urheberrecht. Das Dokument darf zum eigenen Gebrauch kostenfrei genutzt, aber nicht im Internet bereitgestellt oder an Außenstehende weitergegeben werden. Dieser Beitrag ist aufgrund einer (DFG-geförderten) Allianz- bzw. Nationallizenz frei zugänglich. |
Document Type: | Article |
Publishing status: | publishedVersion |
Issue Date: | 2013 |
Appears in Collections: | Fakultät für Maschinenbau |
pos. | country | downloads | ||
---|---|---|---|---|
total | perc. | |||
1 | Germany | 127 | 69.40% | |
2 | United States | 28 | 15.30% | |
3 | China | 11 | 6.01% | |
4 | Ireland | 2 | 1.09% | |
5 | Belgium | 2 | 1.09% | |
6 | Austria | 2 | 1.09% | |
7 | Taiwan | 1 | 0.55% | |
8 | Sweden | 1 | 0.55% | |
9 | Portugal | 1 | 0.55% | |
10 | Netherlands | 1 | 0.55% | |
other countries | 7 | 3.83% |
Hinweis
Zur Erhebung der Downloadstatistiken kommen entsprechend dem „COUNTER Code of Practice for e-Resources“ international anerkannte Regeln und Normen zur Anwendung. COUNTER ist eine internationale Non-Profit-Organisation, in der Bibliotheksverbände, Datenbankanbieter und Verlage gemeinsam an Standards zur Erhebung, Speicherung und Verarbeitung von Nutzungsdaten elektronischer Ressourcen arbeiten, welche so Objektivität und Vergleichbarkeit gewährleisten sollen. Es werden hierbei ausschließlich Zugriffe auf die entsprechenden Volltexte ausgewertet, keine Aufrufe der Website an sich.