dc.identifier.uri |
http://dx.doi.org/10.15488/925 |
|
dc.identifier.uri |
http://www.repo.uni-hannover.de/handle/123456789/949 |
|
dc.contributor.author |
Behrens, Bernd-Arno
|
|
dc.contributor.author |
Hübner, Sven
|
|
dc.contributor.author |
Neumann, André
|
|
dc.date.accessioned |
2016-12-21T14:07:22Z |
|
dc.date.available |
2016-12-21T14:07:22Z |
|
dc.date.issued |
2014 |
|
dc.identifier.citation |
Behrens, B.-A.; Hübner, S.; Neumann, A.: Forming sheets of metal and fibre-reinforced plastics to hybrid parts in one deep drawing process. In: Procedia Engineering 81 (2014), S. 1608-1613. DOI: https://doi.org/10.1016/j.proeng.2014.10.198 |
|
dc.description.abstract |
Each material has its own advantages and disadvantages in terms of its mechanical, chemical and physical properties. Metallic materials are comparatively ductile and easy to process. Fibre reinforced plastics are very stiff and endure high tensile stresses based on their weight. By intelligent combination of these materials into one overall-part light but strong components may be established. However, the conventional production of a separate fibre reinforced plastic (FRP)-component and a metal component and a subsequent joining is time- And labour-intensive and therefore not economical in mass-production. Thus in this paper a new fabrication technology is presented. |
eng |
dc.description.sponsorship |
German Federation of Industrial Research Associations (AiF) |
|
dc.description.sponsorship |
European Research Association for Sheet Metal Working (EFB) |
|
dc.description.sponsorship |
Federal Ministry of Economics and Technology (BMWi) |
|
dc.language.iso |
eng |
|
dc.publisher |
Amsterdam : Elsevier |
|
dc.relation.ispartofseries |
Procedia Engineering 81 (2014) |
|
dc.rights |
CC BY-NC-ND 3.0 Unported |
|
dc.rights.uri |
https://creativecommons.org/licenses/by-nc-nd/3.0/ |
|
dc.subject |
Deep drawing |
eng |
dc.subject |
Hybrid parts |
eng |
dc.subject |
Sheet metal forming |
eng |
dc.subject |
Drawing (forming) |
eng |
dc.subject |
Elastomers |
eng |
dc.subject |
Materials properties |
eng |
dc.subject |
Metal drawing |
eng |
dc.subject |
Metal forming |
eng |
dc.subject |
Metals |
eng |
dc.subject |
Plasticity |
eng |
dc.subject |
Reinforced plastics |
eng |
dc.subject |
Reinforcement |
eng |
dc.subject |
Sheet metal |
eng |
dc.subject |
Chemical and physical properties |
eng |
dc.subject |
Deep-drawing process |
eng |
dc.subject |
Fabrication Technologies |
eng |
dc.subject |
Fibre reinforced plastic (FRP) |
eng |
dc.subject |
Labour-intensive |
eng |
dc.subject |
Metal components |
eng |
dc.subject |
Metallic material |
eng |
dc.subject |
Fiber reinforced plastics |
eng |
dc.subject.classification |
Konferenzschrift |
ger |
dc.subject.ddc |
600 | Technik
|
ger |
dc.subject.ddc |
620 | Ingenieurwissenschaften und Maschinenbau
|
ger |
dc.title |
Forming sheets of metal and fibre-reinforced plastics to hybrid parts in one deep drawing process |
|
dc.type |
Article |
|
dc.type |
Text |
|
dc.relation.issn |
18777058 |
|
dc.relation.doi |
https://doi.org/10.1016/j.proeng.2014.10.198 |
|
dc.bibliographicCitation.volume |
81 |
|
dc.bibliographicCitation.firstPage |
1608 |
|
dc.bibliographicCitation.lastPage |
1613 |
|
dc.description.version |
publishedVersion |
|
tib.accessRights |
frei zug�nglich |
|