Auflistung Fakultät für Maschinenbau nach Lizenz

Sortiert nach: Sortierung: Ergebnisse:

  • 2019 International Aircraft Cabin Air Conference : Conference Proceedings – Presentations 
    Global Cabin Air Quality Executive (GCAQE) (Hamburg : Aircraft Design and Systems Group (AERO), Department of Automotive and Aeronautical Engineering, Hamburg University of Applied Sciences, 2019-09-17)
    The International Aircraft Cabin Air Conferences are developing into a series of conferences organized every two years. The conferences are mapping the business, regulatory and technical solutions to aircraft cabin air ...
  • 2021 International Aircraft Cabin Air Conference: Conference Proceedings 
    Global Cabin Air Quality Executive (GCAQE) (Hamburg : Aircraft Design and Systems Group (AERO), Department of Automotive and Aeronautical Engineering, Hamburg University of Applied Sciences, 2021-03-15)
    The International Aircraft Cabin Air Conferences have developed into a series of conferences that were organized so far in 2017, 2019 and 2021. The conferences are mapping the business, regulatory and technical solutions ...
  • 3D mixed virtual element formulation for dynamic elasto-plastic analysis 
    Cihan, Mertcan; Hudobivnik, Blaž; Aldakheel, Fadi; Wriggers, Peter (Berlin, Heidelberg : Springer, 2021)
    The virtual element method (VEM) for dynamic analyses of nonlinear elasto-plastic problems undergoing large deformations is outlined within this work. VEM has been applied to various problems in engineering, considering ...
  • 3D stabilization-free virtual element method for linear elastic analysis 
    Xu, Bing-Bing; Wriggers, Peter (Amsterdam [u.a.] : Elsevier Science, 2024)
    We present a first-order stabilization-free virtual element method (VEM) for three-dimensional linear elastic problems in this paper. VEM has been increasingly used in various fields of engineering, but the need of ...
  • A comparative analysis of ceramic and cemented carbide end mills 
    Dröder, Klaus; Karpuschewski, Bernhard; Uhlmann, Eckart; Arrabiyeh, Peter A.; Berger, Daniel; Busemann, Sarah; Hartig, Jörg; Madanchi, Nadine; Mahlfeld, Georg; Sommerfeld, Christian (Berlin : Springer, 2020)
    Milling of ferrous metals is usually performed by applying cemented carbide tools due to their high hardness, temperature and wear resistance. Recently, ceramic tool materials have been on the rise and enhanced the efficiency ...
  • A general phase-field model for fatigue failure in brittle and ductile solids 
    Seleš, Karlo; Aldakheel, Fadi; Tonković, Zdenko; Sorić, Jurica; Wriggers, Peter (Berlin : Springer, 2021)
    In this work, the phase-field approach to fracture is extended to model fatigue failure in high- and low-cycle regime. The fracture energy degradation due to the repeated externally applied loads is introduced as a function ...
  • A multiscale DEM–FEM coupled approach for the investigation of granules as crash-absorber in ship building 
    Chaudry, Mohsin Ali; Woitzik, Christian; Düster, Alexander; Wriggers, Peter (Berlin ; Heidelberg [u.a.] : Springer, 2022)
    This paper covers a numerical analysis of a novel approach to increasing the crashworthiness of double hull ships. As proposed in Schöttelndreyer (Füllstoffe in der Konstruktion: ein Konzept zur Verstärkung vonSchiffsseitenhüllen, ...
  • A novel dual-rotor ultrasonic motor for underwater propulsion 
    Lu, Xiaolong; Wang, Zhiwen; Shen, Hui; Zhao, Kangdong; Pan, Tianyue; Kong, Dexu; Twiefel, Jens (Basel : Molecular Diversity Preservation International (MDPI), 2020)
    Micro underwater vehicles (MUVs) have been highlighted recently for underwater explorations because of their high maneuverability, low price, great flexibility, etc. The thrusters of most conventional MUVs are driven by ...
  • A Selection of Benchmark Problems in Solid Mechanics and Applied Mathematics 
    Schröder, Jörg; Wick, Thomas; Reese, Stefanie; Wriggers, Peter; Müller, Ralf; Kollmannsberger, Stefan; Kästner, Markus; Schwarz, Alexander; Igelbüscher, Maximilian; Viebahn, Nils; Bayat, Hamid Reza; Wulfinghoff, Stephan; Mang, Katrin; Rank, Ernst; Bog, Tino; D’Angella, Davide; Elhaddad, Mohamed; Hennig, Paul; Düster, Alexander; Garhuom, Wadhah; Hubrich, Simeon; Walloth, Mirjam; Wollner, Winnifried; Kuhn, Charlotte; Heister, Timo (Berlin [u.a.] : Springer, 2020)
    In this contribution we provide benchmark problems in the field of computational solid mechanics. In detail, we address classical fields as elasticity, incompressibility, material interfaces, thin structures and plasticity ...
  • A Sharp-Interface Model of the Diffusive Phase Transformation in a Nickel-Based Superalloy 
    Munk, Lukas; Reschka, Silvia; Maier, Hans Jürgen; Wriggers, Peter; Löhnert, Stefan (Basel : MDPI, 2022)
    A sharp-interface model employing the extended finite element method is presented. It is designed to capture the prominent γ-γ′ phase transformation in nickel-based superalloys. The novel combination of crystal plasticity ...
  • A virtual element formulation for general element shapes 
    Wriggers, Peter; Hudobivnik, Blaz; Aldakheel, Fadi (Berlin [u.a.] : Springer, 2020)
    The virtual element method is a lively field of research, in which considerable progress has been made during the last decade and applied to many problems in physics and engineering. The method allows ansatz function of ...
  • Abnormal Grain Growth and Pseudoelasticity of Industrially Processed Fe–Mn–Al–Ni Shape Memory Alloy Joined by Metal Inert Gas Welding 
    Viebranz, Vincent Fabian; Bauer, André; Hassel, Thomas; Niendorf, Thomas; Maier, Hans Jürgen (Boston : Springer, 2024)
    The effect of metal inert gas welding on the microstructure, abnormal grain growth and the pseudoelastic properties of industrially processed Fe–Mn–Al–Ni shape memory alloy sheets were studied. Square-butt welds were ...
  • Acoustic field characterization of medical array transducers based on unfocused transmits and single-plane hydrophone measurements 
    Marhenke, Torben; Sanabria, Sergio J.; Chintada, Bhaskara Rao; Furrer, Roman; Neuenschwander, Jürg; Goksel, Orcun (Basel : MDPI AG, 2019)
    Medical ultrasonic arrays are typically characterized in controlled water baths using measurements by a hydrophone, which can be translated with a positioning stage. Characterization of 3D acoustic fields conventionally ...
  • An actuated larynx phantom for pre-clinical evaluation of droplet-based reflex-stimulating laryngoscopes 
    Fast, Jacob Friedemann; He, Jiazhen; Ortmaier, Tobias; Jungheim, Michael; Ptok, Martin; Kahrs, Lüder Alexander (Berlin : De Gruyter, 2019)
    The laryngeal adductor reflex (LAR) is an important protective function of the larynx to prevent aspiration and potentially fatal aspiration pneumonia by rapidly closing the glottis. Recently, a novel method for targeted ...
  • Adapted Fringe Projection Sequences for Changing Illumination Conditions on the Example of Measuring a Wrought-Hot Object Influenced by Forced Cooling 
    Quentin, Lorenz; Beermann, Rüdiger; Reinke, Carl; Kern, Pascal; Kästner, Markus; Reithmeier, Eduard (Basel : MDPI, 2021)
    Optical 3D geometry reconstruction, or more specific, fringe projection profilometry, is a state-of-the-art technique for the measurement of the shape of objects in confined spaces or under rough environmental conditions, ...
  • Adaptive aerodynamic part feeding enabled by genetic algorithm 
    Blankemeyer, Sebastian; Kolditz, Torge; Busch, Jan; Seitz, Melissa; Nyhuis, Peter; Raatz, Annika (Heidelberg : Springer, 2022)
    Aerodynamic feeding systems represent one possibility to meet the challenges of part feeding for automated production in terms of feeding performance and flexibility. The aerodynamic feeding system investigated in this ...
  • Adaptive inspection planning – Consideration of uncertainties in machining 
    Denkena, Berend; Wichmann, Marcel; Reuter, Leon (Düsseldorf : VDI Fachmedien, 2023)
    Data-driven prediction models are the core of adaptive test planning, but always have a model-based prediction error. For a reliable interpretation of the prediction result, the modeling of the associated uncertainty is ...
  • Additive manufacturing of copper vertical interconnect accesses by laser processing 
    Overmeyer, Ludger; Olsen, Ejvind; Hoffmann, Gerd-Albert (Oxford : Elsevier, 2021)
    This paper introduces a new manufacturing process for vertical interconnect accesses (VIA). In contrast to industrially established VIA metallization technologies, the presented approach takes place without any chemical ...
  • Additive manufacturing of metal-bonded grinding tools 
    Denkena, Berend; Krödel, Alexander; Harmes, Jan; Kempf, Fabian; Griemsmann, Tjorben; Hoff, Christian; Hermsdorf, Jörg; Kaierle, Stefan (London : Springer, 2020)
    Grinding tools with superabrasive grains can be manufactured from different bond materials. In several industrial applications, metallic bond systems are used. In general, these show good grain retention and offer a high ...
  • Additive Manufacturing Under Lunar Gravity and Microgravity 
    Reitz, B.; Lotz, C.; Gerdes, N.; Linke, S.; Olsen, E.; Pflieger, K.; Sohrt, S.; Ernst, M.; Taschner, P.; Neumann, J.; Stoll, E.; Overmeyer, L. (Heidelberg : Springer, 2021)
    Mankind is setting to colonize space, for which the manufacturing of habitats, tools, spare parts and other infrastructure is required. Commercial manufacturing processes are already well engineered under standard conditions ...

Suche im Repositorium


Durchblättern

Mein Nutzer/innenkonto

Nutzungsstatistiken