Auflistung Fakultät für Maschinenbau nach Titel

Sortiert nach: Sortierung: Ergebnisse:

  • Fabrication and Sensing Applications of Multilayer Polymer Optical Waveguides 
    Rezem, Maher; Günther, Axel; Rahlves, Maik; Roth, Bernd; Reithmeier, Eduard (Amsterdam : Elsevier, 2016)
    For sensing applications in structural health monitoring, process technology or life sciences polymer micro-optical sensors are highly promising as they offer several advantages in comparison to other sensor types. In this ...
  • Fabrication and use of Cu-Cr-diamond composites for the application in deep feed grinding of tungsten carbide 
    Denkena, B.; Krödel, A.; Lang, R. (Amsterdam [u.a.] : Elsevier Science, 2021)
    Machining of tungsten carbide requires the use of highly wear resistant grinding tools, like metal bonded grinding tools. The abrasive layer of these grinding tools can be regarded as Metal-Matrix-Composites reinforced ...
  • Factors determining microbial colonization of liquid nitrogen storage tanks used for archiving biological samples 
    Bajerski, F.; Bürger, A.; Glasmacher, B.; Keller, E.R.J.; Müller, K.; Mühldorfer, K.; Nagel, M.; Rüdel, H.; Müller, T.; Schenkel, J.; Overmann, J. (Heidelberg : Springer Verlag, 2020)
    The availability of bioresources is a precondition for life science research, medical applications, and diagnostics, but requires a dedicated quality management to guarantee reliable and safe storage. Anecdotal reports of ...
  • Factory life cycle evaluation through integrated analysis of factory elements 
    Dér, Antal; Hingst, Lennart; Karl, Alexander; Nyhuis, Peter; Herrmann, Christoph (Amsterdam [u.a.] : Elsevier, 2021)
    In consequence of the technological advances of the last few decades, factories emerged to highly complex systems that consist of numerous factory elements like production machines, technical building services and the ...
  • Failure Modelling of CP800 Using Acoustic Emission Analysis 
    Stockburger, Eugen; Wester, Hendrik; Behrens, Bernd-Arno (Basel : MDPI, 2023)
    Advanced high-strength steels (AHHS) are widely used in many production lines of car components. For efficient design of the forming processes, numerical methods are frequently applied in the automotive industry. To model ...
  • Failure sensitivity and similarity of process signals among multiple machine tools 
    Denkena, Berend; Klemme, Heinrich; Stiehl, Tobias H. (Amsterdam [u.a.] : Elsevier, 2024)
    For a monitoring system to provide considerable performance, it usually requires machine- and process-specific information. This includes information about which process signals are sensitive to failures and which signal ...
  • A Failure-Tolerant Approach for Autonomous Mobile Manipulation in RoboCup@Work 
    Carstensen, Jan; Carstensen, Torben; Aden, Simon; Dick, Andrej; Hübner, Jens; Krause, Sven; Michailik, Alexander; Wigger, Johann; Friederichs, Jan; Kotlarski, Jens (Berlin ; Heidelberg : Springer, 2016)
    In this paper we summarize how the LUHbots team was able to win the 2015 RoboCup@Work league. We introduce various failure handling concepts, which lead to the robustness necessary to outperform all the other teams. The ...
  • Fallbeispiele zum Reverse Engineering im Passagierflugzeugentwurf 
    Cheema, John Singh (Hamburg : Aircraft Design and Systems Group (AERO), Department of Automotive and Aeronautical Engineering, Hamburg University of Applied Sciences, 2019)
    Zweck – In dieser Bachelorarbeit werden die öffentlich nicht zugänglichen Technologieparameter von Passagierflugzeugen näherungsweise bestimmt. Das sind maximaler Auftriebsbeiwert bei Start und Landung, maximale Gleitzahl ...
  • Fast and automatic depth control of iterative bone ablation based on optical coherence tomography data 
    Fuchs, Alexander; Pengel, Steffen; Bergmeier, Jan; Kahrs, Lüder Alexander; Ortmaier, Tobias (Bellingham, Wash. : SPIE, 2015)
    Laser surgery is an established clinical procedure in dental applications, soft tissue ablation, and ophthalmology. The presented experimental set-up for closed-loop control of laser bone ablation addresses a feedback ...
  • Fast in-situ tool inspection based on inverse fringe projection and compact sensor heads 
    Matthias, Steffen; Kästner, Markus; Reithmeier, Eduard (Bellingham, Wash. : SPIE, 2016)
    Inspection of machine elements is an important task in production processes in order to ensure the quality of produced parts and to gather feedback for the continuous improvement process. A new measuring system is presented, ...
  • Fat-IntraBody Communication at 5.8 GHz: Verification of Dynamic Body Movement Effects Using Computer Simulation and Experiments 
    Asan, Noor Badariah; Hassan, Emadeldeen; Perez, Mauricio David; Joseph, Laya; Berggren, Martin; Voigt, Thiemo; Augustine, Robin (New York, NY : IEEE, 2021)
    This paper presents numerical modeling and experimental validation of the signal path loss at the 5.8 GHz Industrial, Scientific, and Medical (ISM) band, performed in the context of fat-intrabody communication (fat-IBC), ...
  • Fatigue and fatigue after impact behaviour of Thin- and Thick-Ply composites observed by computed tomography 
    Kötter, Benedikt; Endres, Janina; Körbelin, Johann; Bittner, Florian; Endres, Hans-Josef; Fiedler, Bodo (Amsterdam : Elsevier, 2021)
    This study investigates the influence of load ratio and impact damage on the fatigue behaviour of high-performance carbon fibre reinforced polymers (CFRP) with areal fibre weights between 30 gsm and 360 gsm. For undamaged ...
  • FE-based Layer Design of Deposition-Welded Semi-finished Parts for the Production of Hybrid Bevel Gear 
    Behrens, Bernd-Arno; Uhe, Johanna; Wester, Hendrik; Matthias, Tim; Büdenbender, Christoph (Amsterdam [u.a.] : Elsevier, 2020)
    Multi-material solutions offer numerous benefits as they, in contrary to conventional monolithic parts, represent tailor-made hybrid components with enhanced application-optimisation properties. The use of hybrid semi-finished ...
  • FE-Simulation Based Design of Wear-Optimized Cutting Edge Roundings 
    Bergmann, Benjamin; Denkena, Berend; Beblein, Sascha; Picker, Tobias (Basel : MDPI, 2021)
    The performance of cutting tools can be significantly enhanced by matching the cutting edge rounding to the process and material properties. However, the conventional cutting edge rounding design is characterized by a ...
  • FEA-based optimisation of a clinching process with an open multiple-part die aimed at damage minimisation in CR240BH-AlSi10MnMg joints 
    Behrens, Bernd-Arno; Bouguecha, Anas; Vucetic, Milan; Hübner, Sven; Yilkiran, Deniz; Jin, Yilin; Peshekhodov, Ilya (Les Ulis : EDP Sciences, 2015)
    The paper presents results of a FEA-based tool design optimisation for a clinching process with an open multiple-part die. The studied materials are the bake-hardening steel CR240BH (1.5 mm) on the punch side and the ...
  • Feasibility Assessment of Optical Coherence Tomography-Guided Laser Labeling in Middle Cranial Fossa Approach 
    Mohebbi, Saleh; Lexow, Jakob; Fuchs, Alexander; Rau, Thomas; Tauscher, Sebastian; Mirsalehi, Marjan; Hosseini, Seyed Mousa Sadr; Ortmaier, Tobias; Lenarz, Thomas; Majdani, Omid (Maschhad : Mashhad University of Medical Sciences, 2018)
    Introduction: Different approaches have been developed to find the position of the internal auditory canal (IAC) in middle cranial fossa approach. A feasibility study was performed to investigate the combination of cone ...
  • Feasibility Evaluation of Milling Designs Using Multi-Agent Systems 
    Plappert, S.; Becker, C.; Gembarski, P.C.; Lachmayer, R. (Cambridge : Cambridge University Press, 2022)
    During product development, many decisions have to be made that affect the entire product life cycle and often lead to errors that cause additional effort. To proactively support the engineer in evaluating his design in a ...
  • Feasibility of Round Window Stimulation by a Novel Electromagnetic Microactuator 
    Van Drunen, Wouter Johannes; Mueller, Mathias; Glukhovskoy, Anatoly; Salcher, Rolf; Wurz, Marc Christopher; Lenarz, Thomas; Maier, Hannes (New York, NY : Hindawi Publishing Corporation, 2017)
    Introduction. Most implantable hearing aids currently available were developed to compensate the sensorineural hearing loss by driving middle ear structures (e.g., the ossicles). These devices are successfully used in round ...
  • Feature tracking for automated volume of interest stabilization on 4D-OCT images 
    Laves, Max-Heinrich; Schoob, Andreas; Kahrs, Lüder Alexander; Pfeiffer, Tom; Huber, Robert; Ortmaier, Tobias (Bellingham, Wash. : SPIE, 2017)
    A common representation of volumetric medical image data is the triplanar view (TV), in which the surgeon manually selects slices showing the anatomical structure of interest. In addition to common medical imaging such as ...
  • Feed-Forward Neural Networks for Failure Mechanics Problems 
    Aldakheel, Fadi; Satari, Ramish; Wriggers, Peter (Basel : MDPI AG, 2021)
    This work addresses an efficient neural network (NN) representation for the phase-field modeling of isotropic brittle fracture. In recent years, data-driven approaches, such as neural networks, have become an active research ...

Suche im Repositorium


Durchblättern

Mein Nutzer/innenkonto

Nutzungsstatistiken