Startseite
→
Fakultäten
→
Fakultät für Maschinenbau
→
Auflistung Fakultät für Maschinenbau nach Autor/in

Auflistung Fakultät für Maschinenbau nach Autor/in "92337565-8f60-4d20-bc24-11e2bc107827"

Anzeige der Dokumente 1-5 von 5

Advanced process design for re-contouring using a time-domain dynamic material removal simulation

Denkena, Berend; Pape, O.; Grove, T.; Mücke, A. (Amsterdam : Elsevier B.V., 2019)

The repair of components often requires the removal of excess weld material. This removal is considered as re-contouring. Re-contouring processes have to be designed individually for each case of damage to fulfil the high ...
Increasing productivity in heavy machining using a simulation based optimization method for porcupine milling cutters with a modified geometry

Denkena, B.; Krödel, A.; Pape, O. (Amsterdam [u.a.] : Elsevier, 2020)

Porcupine milling cutters offer a high potential for increasing the metal removal rate in heavy machining of steel and titanium. Here, the available machine power and the maximum radial force represent important process ...
Increasing productivity in turning of hard-to-cut materials by means of modified flank faces

Denkena, Berend; Bergmann, B.; Grove, T.; Pape, O. (Amsterdam : Elsevier, 2017)

The high thermo-mechanical tool load during cutting of hard-to-cut material leads to an increased tool wear, which affects the surface integrity and tool life adversely. An innovative approach to counter the wear is to ...
Optimization of complex cutting tools using a multi-dexel based material removal simulation

Denkena, Berend; Grove, T.; Pape, O. (Amsterdam : Elsevier B.V., 2019)

Multi-dexel based material removal simulations provide a fast and flexible way to compute process forces and tool deflections for milling and turning operations. This allows an advanced process planning including detection ...
Process design for 5-axis ball end milling using a real-time capable dynamic material removal simulation

Denkena, Berend; Pape, O.; Krödel, A.; Böß, V.; Ellersiek, L.; Mücke, A. (Heidelberg : Springer, 2021)

For repairing turbine blades or die and mold forms, additive manufacturing processes are commonly used to build-up new material to damaged sections. Afterwards, a subsequent re-contouring process such as 5-axis ball end ...

Auflistung Fakultät für Maschinenbau nach Autor/in "92337565-8f60-4d20-bc24-11e2bc107827"

Auflistung Fakultät für Maschinenbau nach Autor/in "92337565-8f60-4d20-bc24-11e2bc107827"

Suche im Repositorium

Durchblättern

Gesamter Bestand

Diese Sammlung

Mein Nutzer/innenkonto

Nutzungsstatistiken