Auflistung Fakultät für Maschinenbau nach Autor/in "6800bbcd-88a8-4dce-912a-272da2b99445"

Auflistung Fakultät für Maschinenbau nach Autor/in "6800bbcd-88a8-4dce-912a-272da2b99445"

Sortiert nach: Sortierung: Ergebnisse:

  • Anisotropic characteristics analysis of 3D-printed optics 
    Grabe, Tobias; Biermann, Tobias; Bayerl, Maximilian; Lachmayer, Roland (Erlangen : Deutsche Gesellschaft für angewandte Optik, 2020)
    The Additive Manufacturing of transparent materials enables cost efficient rapidprototyping of optically transparent components. The components are built layer-by-layer which can cause anisotropic optical properties. We ...
  • Application-inspired additive manufacturing of Raman optics 
    Grabe, Tobias; Biermann, Tobias; Wolf, Alexander; Al-Nuwaider, Jassim; Krauss, Henrik; August, Jannes; Yu, Weijia; Heinz, Jannis Ben; Bayerl, Maximilian; Xu, Ke; Wang, Qiang; Wu, Junjun; Roth, Bernhard; Ren, Wei; Lachmayer, Roland (Amsterdam [u.a.] : Elsevier Science, 2023)
    While additive manufacturing (AM) enables the production of versatile optical components, the limited knowledge of manufacturing processes makes the development of accurate simulation tools and evaluation criteria challenging. ...
  • Distraction Potential of Vehicle-Based On-Road Projection 
    Glück, Tobias; Biermann, Tobias; Wolf, Alexander; Budig, Sören; Ziebehl, Arved; Knöchelmann, Marvin; Lachmayer, Roland (Basel : MDPI, 2021)
    With regard to autonomous driving, on-road projections cannot only be used for communication with the driver but also with other road users. Our study aims to investigate the distraction potential for other road users when ...
  • Highlighting New Possibilities: A Comparison of SLOT and CT in the Analysis of 3D Printed Optical Elements 
    Hill, Ole; Biermann, Tobias; Eckert, Gerrit; Sleiman, Khodor; Mesecke, Lennart; Rettschlag, Katharina; Jäschke, Peter; Kaierle, Stefan; Bigall, Nadja C.; Ripken, Tammo; Lachmayer, Roland; Wollweber, Merve (Hannover : Institutionelles Repositorium der Leibniz Universität Hannover, 2024)
    Novel printing techniques for optical elements produce characteristics in these optical elements which can sometimes not be resolved with classic testing or imaging methods. As highly individualized components often have ...
  • Multiphysical simulation approach for specifying material properties of additively manufactured laser heat sinks: Potentials and challenges 
    Röttger, Julian; Grabe, Tobias; Biermann, Tobias; Ziebehl, Arved; Ley, Peer-Phillip; Wolf, Alexander; Lachmayer, Roland (Illmenau : Deutsche Gesellschaft für Angewandte Optik, 2021)
    Additive manufacturing of laser heat sinks enables the optimization of cooling channel geometries and the integration of various functions within a single component. Lightweight and cost-effective designs can be realized ...
  • Potentials and Challenges in Additive Manufacturing of Nanoparticle-infused Silicone Optics 
    Ziebehl, Arved; Biermann, Tobias; Grabe, Tobias; Röttger, Julian; Ley, Peer-Phillip; Wolf, Alexander; Lachmayer, Roland (Illmenau : Deutsche Gesellschaft für Angewandte Optik, 2021)
    Extrusion-based silicone manufacturing processes enable the fabrication of functionalized optics by controlling the material properties of each printed voxel. In this paper, potentials of functionalization as well as ...
  • Potentials and challenges of additive manufacturing using highly transparent silicone materials 
    Biermann, Tobias; Grabe, Tobias; Ley, Peer-Philip; Hüchting, Jasper; Lachmayer, Roland (Deutsche Gesellschaft für Angewandte Optik : Erlangen, 2020-08-07)
    The research in additive manufacturing using highly transparent silicone for optical applications is still in its early stages. This contribution is aiming to investigate potentials and challenges in additive manufacturing ...
  • Potentials and Challenges of Generative Design for Additively Manufactured Freeform Optics 
    Teves, Simon; Xia, Panpan; Ziebehl, Arved; Biermann, Tobias; Grabe, Tobias; Lachmayer, Roland (Erlangen: Deutsche Gesellschaft für Angewandte Optik, 2023-08-18)
    The additive manufacturing of optical elements only partially exploits its design freedom as suitable design methods are not available and process characteristics complicate performance predictions. To account for this, a ...

Suche im Repositorium


Durchblättern

Mein Nutzer/innenkonto

Nutzungsstatistiken