Auflistung Fakultät für Maschinenbau nach Autor/in "5a12f63f-6f00-404b-ad0a-b292b0a21222"

Auflistung Fakultät für Maschinenbau nach Autor/in "5a12f63f-6f00-404b-ad0a-b292b0a21222"

Sortiert nach: Sortierung: Ergebnisse:

  • Experimental setup to characterize flow-induced anisotropy of sheet metals 
    Gutknecht, F.; Gerstein, G.; Traphöner, H.; Clausmeyer, T.; Nürnberger, F. (Bristol : Institute of Physics Publishing, 2018)
    For many metals, a transient variation of the yield stress can be observed when changing the orientation of a load-path. Such behavior affects the manufacturing process itself, e.g. by increasing forming forces, altered ...
  • Influences on the formability and mechanical properties of 7000-aluminum alloys in hot and warm forming 
    Behrens, Bernd-Arno; Nürnberger, F.; Bonk, Christian; Hübner, S.; Behrens, S.; Vogt, H. (Bristol : Institute of Physics Publishing, 2017)
    Aluminum alloys of the 7000 series possess high lightweight potential due to their high specific tensile strength combined with a good ultimate elongation. For this reason, hot-formed boron-manganese-steel parts can be ...
  • Mechanical properties and formability of en AW-7075 in cold forming processes 
    Behrens, B.-A.; Hübner, S.; Vogt, H.; Golovko, O.; Behrens, S.; Nürnberger, F. (London [u.a.] : Institute of Physics, 2020)
    Due to a low density and high tensile strength, the aluminum alloy EN AW 7075 T6 offers a high lightweight potential for structural components. Since its formability is limited at room temperature in the T6 temper state, ...
  • Microstructural characterization and simulation of damage for geared sheet components 
    Gerstein, G.; Isik, K.; Gutknecht, F.; Sieczkarek, P.; Ewert, J.; Tekkaya, A.E.; Clausmeyer, T.; Nürnberger, F. (Bristol : Institute of Physics Publishing, 2017)
    The evolution of damage in geared components manufactured from steel sheets was investigated, to analyse the influence of damage caused by the sheet-bulk-metal forming. Due to the inhomogeneous and multi-axial deformation ...
  • Press Hardening of Tubes with Additional Interior Spray Cooling 
    Behrens, Bernd-Arno; Maier, H.J.; Neumann, A.; Moritz, J.; Hübner, S.; Gretzki, T.; Nürnberger, F.; Spiekermeier, A. (2015)
    Press-hardened profiles are used e.g. for automotive applications in order to improve light weight construction due to the high reachable strength. The application of interior water-air spray cooling contributes to ...
  • Strain path dependency in incremental sheet-bulk metal forming 
    Wernicke, S.; Hahn, M.; Gerstein, G.; Nürnberger, F.; Tekkaya, A.E. (Paris [u.a.] : Springer, 2020)
    Incremental sheet-bulk metal forming (iSBMF) enables the manufacture of functional lightweight components featuring a load-adapted shape with a high material efficiency. The flexibility of the incremental forming process ...

Suche im Repositorium


Durchblättern

Mein Nutzer/innenkonto

Nutzungsstatistiken