Auflistung Fakultät für Maschinenbau nach Autor/in "4d245234-9abe-4f07-abca-75f1fc9ddca7"

Auflistung Fakultät für Maschinenbau nach Autor/in "4d245234-9abe-4f07-abca-75f1fc9ddca7"

Sortiert nach: Sortierung: Ergebnisse:

  • Influence of High Current-Density Impulses on the Stress-Strain Response and Microstructural Evolution of the Single Crystal Superalloy CMSX-4 
    Demler, Eugen; Gerstein, Gregory; Dalinger, Andrej; Epishin, Alexander; Heidenblut, Torsten; Nuernberger, Florian; Maier, Hans Jürgen (Sao Carlos : Federal University of São Carlos, 2018)
    Owing to the low formability of single-crystal nickel-based materials, single-crystal components are typically cast. Subsequently, a multi-stage heat treatment is carried out in order to partially compensate the dendrite ...
  • Investigations of ductile damage in DP600 and DC04 deep drawing steel sheets during punching 
    Isik, Kerim; Gerstein, Gregory; Gutknecht, Florian; Clausmeyer, Till; Nuernberger, Florian; Maier, Hans Jürgen; Tekkaya, A. Erman (Amsterdam : Elsevier Science Bv, 2016)
    The paper presents numerical and microstructural investigations on a punching process of 2 mm thick steel sheets. The dual phase steel DP600 and the mild steel DC04 exhibit different damage and fracture characteristics. ...
  • Investigations on Additively Manufactured Stainless Bearings 
    Coors, Timm; Faqiri, Mohamad Yusuf; Saure, Felix; Kahra, Christoph; Buedenbender, Christoph; Peddinghaus, Julius; Prasanthan, Vannila; Pape, Florian; Hassel, Thomas; Herbst, Sebastian; Nuernberger, Florian; Wester, Hendrik; Uhe, Johanna; Breidenstein, Bernd; Denkena, Berend; Behrens, Bernd-Arno; Poll, Gerhard; Maier, Hans Juergen (Basel : MDPI, 2022)
    Additive manufacturing with multi-material design offers great possibilities for lightweight and function-integrated components. A process chain was developed in which hybrid steel–steel-components with high fatigue strength ...
  • Patterning of Surfaces for Subsequent Roll Bonding in a Low-Oxygen Environment Using Deformable Mesh Inlays 
    Frolov, Yaroslav; Bobukh, Oleksandr; Samsonenko, Andrii; Nuernberger, Florian (Basel : MDPI, 2023)
    Efficient roll bonding for the manufacturing of clad strips not only requires surface activation but also is improved by a surface patterning to reduce the initial contact area. This increases contact stresses and facilitates ...

Suche im Repositorium


Durchblättern

Mein Nutzer/innenkonto

Nutzungsstatistiken