dc.identifier.uri |
http://dx.doi.org/10.15488/1828 |
|
dc.identifier.uri |
http://www.repo.uni-hannover.de/handle/123456789/1853 |
|
dc.contributor.author |
Schmidt, C.
|
|
dc.contributor.author |
Denkena, Berend
|
|
dc.contributor.author |
Hocke, T.
|
|
dc.contributor.author |
Völtzer, K.
|
|
dc.date.accessioned |
2017-09-07T11:22:18Z |
|
dc.date.available |
2017-09-07T11:22:18Z |
|
dc.date.issued |
2017 |
|
dc.identifier.citation |
Schmidt, C.; Denkena, B.; Hocke, T.; Völtzer, K.: Influence of AFP Process Parameters on the Temperature Distribution Used for Thermal in-process Monitoring. In: Procedia CIRP 66 (2017), S. 68-73. DOI: https://doi.org/10.1016/j.procir.2017.03.220 |
|
dc.description.abstract |
Automated Fiber Placement is an important manufacturing process when it comes to aerospace part generation. To minimize the machine downtime, an online monitoring system is necessary to prevent time consuming visual inspection. Therefore, a new thermal in-process monitoring system is integrated. Herewith spotted temperature difference enable the localization of placed tows and detection of defects. The thermal contrast between subsurface and tows depends on different process parameters such as lay-up speed, tooling temperature and compaction pressure. This influence is analyzed and discussed within lay-up studies to gain further knowledge about the different effects to increase the reliability of in-process monitoring as well as AFP processes. |
eng |
dc.description.sponsorship |
Therm-O-Plan |
|
dc.description.sponsorship |
Niedersächsisches Vorab, Volkswagen Foundation |
|
dc.language.iso |
eng |
|
dc.publisher |
Amsterdam : Elsevier |
|
dc.relation.ispartofseries |
Procedia CIRP 66 (2017) |
|
dc.rights |
CC BY-NC-ND 4.0 Unported |
|
dc.rights.uri |
https://creativecommons.org/licenses/by-nc-nd/4.0/ |
|
dc.subject |
Automated Fiber Placement |
eng |
dc.subject |
Process Monitoring |
eng |
dc.subject |
Thermography |
eng |
dc.subject |
Composite materials |
eng |
dc.subject |
Manufacture |
eng |
dc.subject |
Process control |
eng |
dc.subject |
Process monitoring |
eng |
dc.subject |
Thermography (temperature measurement) |
eng |
dc.subject |
Compaction pressure |
eng |
dc.subject |
Detection of defects |
eng |
dc.subject |
Fiber placement |
eng |
dc.subject |
In-process monitoring |
eng |
dc.subject |
Manufacturing process |
eng |
dc.subject |
On-line monitoring system |
eng |
dc.subject |
Process parameters |
eng |
dc.subject |
Temperature differences |
eng |
dc.subject |
Monitoring |
eng |
dc.subject.ddc |
620 | Ingenieurwissenschaften und Maschinenbau
|
ger |
dc.title |
Influence of AFP Process Parameters on the Temperature Distribution Used for Thermal in-process Monitoring |
eng |
dc.type |
Article |
|
dc.type |
Text |
|
dc.relation.issn |
00136848 |
|
dc.relation.doi |
https://doi.org/10.1016/j.procir.2017.03.220 |
|
dc.bibliographicCitation.volume |
66 |
|
dc.bibliographicCitation.firstPage |
68 |
|
dc.bibliographicCitation.lastPage |
73 |
|
dc.description.version |
publishedVersion |
|
tib.accessRights |
frei zug�nglich |
|