This study investigates the wear behavior of additively welded cladding layers on less wear-resistant base materials using plasma-transferred arc welding and laser hot-wire cladding. The cladding layers are made from atomized AISI 52100, AISI 5140, and a stainless steel with (0.52 wt% C, 0.9 wt% Si, 14 wt% Cr, 0.4 wt% Mo, 1.8 wt% Ni, 1.2 wt% V, bal. Fe) on unalloyed steel AISI 1022M as the base material. The specimens' microstructure and surface hardness are comparable with conventional specimens of monolithic AISI 52100 and AISI 4140, which is used as a reference. Tribometer tests are carried out in ball-on-disk configuration to investigate the wear resistance of the specimen. The multimaterial specimens show comparable wear behavior to their monolithic counterparts, and a good performance of the stainless specimen in pure sliding is proven. These findings suggest that additive manufacturing processes can be used to clad less wear-resistant base materials and achieve high wear resistance, making it possible to exploit the advantages of surface coatings under severe wear conditions.
|