Behrens, B.-A.; Doege, E.; Krimm, R.: Shortening tool setting time for transfer presses. In: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 220 (2006), Nr. 4, S. 533-539. DOI: https://doi.org/10.1243/095440505X32940
Zusammenfassung: | |
The production processes of sheet metal products with complex geometries often use transfer presses to obtain fully formed workpieces from a single machine. The job of adjusting a new multistage tool set increases with the number of stages because the deformations of the frame, the bottom platen, and the ram vary with the different applied loads. Each of the forces applied by the stages causes a specific deformation of the machine, while each stage is also influenced by all other stages. The Institute for Metal Forming and Metal Forming Machine Tools (University of Hanover, Germany) has developed a new computer-based set-up system for multistage tools. Once the machine properties have been measured, the system calculates the deformation of the machine on the basis of the forming forces measured during the tool setting process. The use of the developed system will help to shorten the first set-up of new tool sets. Manufacturers of sheet metal products are expecting significant time savings. © IMechE 2006. | |
Lizenzbestimmungen: | Es gilt deutsches Urheberrecht. Das Dokument darf zum eigenen Gebrauch kostenfrei genutzt, aber nicht im Internet bereitgestellt oder an Außenstehende weitergegeben werden. Dieser Beitrag ist aufgrund einer (DFG-geförderten) Allianz- bzw. Nationallizenz frei zugänglich. |
Publikationstyp: | Article |
Publikationsstatus: | publishedVersion |
Erstveröffentlichung: | 2006 |
Die Publikation erscheint in Sammlung(en): | Fakultät für Maschinenbau |
Pos. | Land | Downloads | ||
---|---|---|---|---|
Anzahl | Proz. | |||
1 | Germany | 47 | 48,96% | |
2 | United States | 22 | 22,92% | |
3 | China | 9 | 9,38% | |
4 | Russian Federation | 4 | 4,17% | |
5 | Czech Republic | 3 | 3,12% | |
6 | Taiwan | 1 | 1,04% | |
7 | Peru | 1 | 1,04% | |
8 | Netherlands | 1 | 1,04% | |
9 | Ireland | 1 | 1,04% | |
10 | Argentina | 1 | 1,04% | |
andere | 6 | 6,25% |
Hinweis
Zur Erhebung der Downloadstatistiken kommen entsprechend dem „COUNTER Code of Practice for e-Resources“ international anerkannte Regeln und Normen zur Anwendung. COUNTER ist eine internationale Non-Profit-Organisation, in der Bibliotheksverbände, Datenbankanbieter und Verlage gemeinsam an Standards zur Erhebung, Speicherung und Verarbeitung von Nutzungsdaten elektronischer Ressourcen arbeiten, welche so Objektivität und Vergleichbarkeit gewährleisten sollen. Es werden hierbei ausschließlich Zugriffe auf die entsprechenden Volltexte ausgewertet, keine Aufrufe der Website an sich.