Klauer, K.; Altherr, N.; Eifler, M.; Kirsch, B.; Böß, V. et al.: Kinematic simulation to investigate the influence of the cutting edge topography when ball end micro milling. In: Procedia CIRP 102 (2021), S. 109-114. DOI: https://doi.org/10.1016/j.procir.2021.09.019
Zusammenfassung: | |
During the ball end micro milling of material measures, the cutting edge topography is imaged on the machined workpiece. The influence of the chipping on the resulting surface quality is much more dominant than other kinematic effects. In this simulative study, a model is built that is able to predict the correlation between the cutting edge topography and the resulting workpiece topography. Thus, the mentioned correlation can be investigated without overlaying effects of material separation or measurement uncertainties, which are unavoidable in an experimental study. The model has been validated based on four artificial chippings. | |
Lizenzbestimmungen: | CC BY-NC-ND 4.0 Unported |
Publikationstyp: | Article |
Publikationsstatus: | publishedVersion |
Erstveröffentlichung: | 2021 |
Die Publikation erscheint in Sammlung(en): | Fakultät für Maschinenbau |
Pos. | Land | Downloads | ||
---|---|---|---|---|
Anzahl | Proz. | |||
1 | Germany | 7 | 43,75% | |
2 | United States | 4 | 25,00% | |
3 | Indonesia | 2 | 12,50% | |
4 | Taiwan | 1 | 6,25% | |
5 | Europe | 1 | 6,25% | |
6 | Denmark | 1 | 6,25% |
Hinweis
Zur Erhebung der Downloadstatistiken kommen entsprechend dem „COUNTER Code of Practice for e-Resources“ international anerkannte Regeln und Normen zur Anwendung. COUNTER ist eine internationale Non-Profit-Organisation, in der Bibliotheksverbände, Datenbankanbieter und Verlage gemeinsam an Standards zur Erhebung, Speicherung und Verarbeitung von Nutzungsdaten elektronischer Ressourcen arbeiten, welche so Objektivität und Vergleichbarkeit gewährleisten sollen. Es werden hierbei ausschließlich Zugriffe auf die entsprechenden Volltexte ausgewertet, keine Aufrufe der Website an sich.