Auflistung nach Schlagwort "Automation"

Sortiert nach: Sortierung: Ergebnisse:

  • Analysis of the Current Situation on Automation and Digitalization in Moroccan Industry 
    be Isa, Johannes; Merkel, Lukas; Brixle, Nicolas; Fimpel, John Ulrich; Djalali, Ardin (Hannover : publish-Ing., 2021)
    Morocco is establishing itself as a key industrial location and logistical hub for the African continent. The Competence Center on Automation (CCoA), funded by the Federal Ministry for Economic Cooperation and Development, ...
  • Annals of Scientific Society for Assembly, Handling and Industrial Robotics 2021 
    Schüppstuhl, Thorsten; Tracht, Kirsten; Raatz, Annika (Cham : Springer Nature, 2022)
    This Open Access proceedings presents a good overview of the current research landscape of assembly, handling and industrial robotics. The objective of MHI Colloquium is the successful networking at both academic and ...
  • Approaching Automation of Production Planning and Control: A Theoretical Framework 
    Lucht, Torben; Drewal, Fabian; Nyhuis, Peter (Hannover : publish-Ing., 2021)
    The ongoing digitization of production has led to a significant increase in global competition. Manufacturing companies located in high-wage countries such as Germany must find ways to transform their production to ...
  • Automated extraction of plantations from ikonos satellite imagery using a level set based segmentation method 
    Vogt, Karsten; Scheuermann, Björn; Becker, Christian; Büschenfeld, Torsten; Rosenhahn, Bodo; Ostermann, Jörn (Göttingen : Copernicus GmbH, 2010)
    In this article we present a method that extracts plantations from satellite imagery by finding and exploiting appropriate feature space projections. Segmentation is done using an automatic two-region segmentation based ...
  • Automated extraction of the Antarctic coastline using snakes 
    Klinger, T.; Heipke, Christian; Ott, N.; Schenke, H.W.; Ziems, M. (Göttingen : Copernicus GmbH, 2010)
    In this paper we present an automatic approach for coastline detection from images which is based on parametric active contours (snakes). Snakes require the definition of an energy functional that reflects the underlying ...
  • Automated geometry measurement and deep rolling of butt welds 
    Heide, Klaas Maximilian; Heikebrügge, Steffen; Dänekas, Christian; Breidenstein, Bernd; Schaumann, Peter (Heidelberg : Springer, 2022)
    During the joining of two metal sheets by welding, a process-specific geometry of the weld is created. The local geometry of the created weld has a decisive influence on its fatigue strength. This is due to stress concentration ...
  • Automated methods for ferrocene chemistry 
    Gathy, Robert (Hannover : Institutionelles Repositorium der Leibniz Universität Hannover, 2022)
    Despite numerous technical advances over the last century, the field of academic organic chemistry still relies heavily on manual labor and non-systematic experiment design. Discovery and optimization of chemical reactions ...
  • Automated process planning in milling of hybrid components 
    Denkena, Berend; Wichmann, Marcel; Heide, Klaas Maximilian; Wiesener, Frederik; Nguyen, Hai Nam (Berlin, Heidelberg : Springer, 2023)
    Hybrid material composites can meet the increasing demands for high strength and low weight due to their different workpiece properties. Usually, hybrid components require post-machining after their fabrication. Due to the ...
  • Automatic qualtiy control of cropland and grasland GIS objects using IKONOS satellite imagery 
    Helmholz, Petra; Heipke, Christian; Rottensteiner, Franz (Göttingen : Copernicus GmbH, 2010)
    As a consequence of the wide-spread application of digital geo-data in Geoinformation Systems (GIS), quality control has become increasingly important. A high degree of automation is required in order to make quality control ...
  • Automatic re-contouring of repair-welded tool moulds 
    Denkena, Berend; Dittrich, Marc-Andre; Heide, Klaas Maximilian (Amsterdam [u.a.] : Elsevier, 2019)
    The process of repairing damaged tool moulds is conducted manually in the industry. This results in long process times as well as a high dependence of the repair result on the experience of the worker. After a visual ...
  • Automatic road network extraction in suburban areas from high resolution aerial images 
    Grote, Anne; Rottensteiner, Franz (Göttingen : Copernicus GmbH, 2010)
    In this paper a road network extraction algorithm for suburban areas is presented. The algorithm uses colour infrared (CIR) images and digital surface models (DSM). The CIR data allow a good separation between vegetation ...
  • Automation concepts and gripping solutions for bonding with reactive multilayer systems 
    Heyn, J.; Blumenthal, P.; Hemken, G.; Fiedler, S.; Walz, C.; Raatz, Annika; Dröder, Klaus (Amsterdam : Elsevier, 2014)
    Reactive multilayer systems (RMS) represent an innovative heat source for the establishment of solder joints. They offer fast bonding processes that introduce very little thermal input and internal stress on the bonded ...
  • Automation of cell culture assays using a 3D-printed servomotor-controlled microfluidic valve system 
    Winkler, Steffen; Menke, Jannik; Meyer, Katharina V.; Kortmann, Carlotta; Bahnemann, Janina (Cambridge : RSC, 2022)
    Microfluidic valve systems show great potential to automate mixing, dilution, and time-resolved reagent supply within biochemical assays and novel on-chip cell culture systems. However, most of these systems require a ...
  • Automatisierung von Guidelines für Videoerstellung im Requirements Engineering 
    Happe, Janko (Hannover : Gottfried Wilhelm Leibniz Universität Hannover, Institut für Praktische Informatik, 2018-09-28)
    Eine zentrale Schwierigkeit im Requirements Engineering besteht darin, ein gemeinsames Verständnis zwischen Entwickler und Kunde zu schaffen. Eine aus dieser Schwierigkeit resultierende Methode ist die Erstellung von ...
  • Building generalization using deep learning 
    Sester, Monika; Feng, Yu; Thiemann, Frank (Göttingen : Copernicus GmbH, 2018)
    Cartographic generalization is a problem, which poses interesting challenges to automation. Whereas plenty of algorithms have been developed for the different sub-problems of generalization (e.g. simplification, displacement, ...
  • Computer Aided Inspection Planning For Automation Of On-Machine Inspection Of Customised Milling Parts 
    Krebs, Jonas; Roedel, Lars; Mueller, Gregor (Hannover : publish-Ing., 2023)
    Customised products force manufacturing systems to operate efficient at batch size one. Automation in upstream processes and on shop floor increase productivity. Besides value-adding processes, quality management to sustain ...
  • Concept of a bonding technology for dies below 150 micrometers 
    Gottwald, Simon Nicolas; Reitz, Birger; Albrecht, Daniel; Overmeyer, Ludger (Amsterdam [u.a.] : Elsevier, 2020)
    Due to rising demand for electrically contacted bare dies, bonding rates are to be increased. Technically, however, current bonding processes are almost at their limit. The use of continuous and consistent kinematics of ...
  • Detecting Deterministic Chaotic Inter-arrival Times in Material Flow Systems 
    Manns, Martin; Höhnen, Denny (Hannover : publish-Ing., 2022)
    Automated, modular, asynchronous and locally controlled material flow systems promise high routing flexibility in production lines because their conveying modules can be reconfigured without reprogramming PLCs. However, ...
  • Determination Of The Level Of Automation For Additive Manufacturing Process Chains 
    Horstkotte, Rainer; Bruning, Benedikt; Prümmer, Marcel; Arntz, Kristian; Bergs, Thomas (Hannover : publish-Ing., 2021)
    Industrial manufacturing is confronted with increased cost pressure due to international competition. The use of automation solutions can help to optimally exploit existing potentials and react to market competitors. In ...
  • Development of a form-flexible handling technology with active cooling for hybrid components in forging processes 
    Ince, Caner-Veli; Geggier, Jan; Bruns, Christopher; Raatz, Annika (Amsterdam [u.a.] : Elsevier, 2021)
    Tailored Forming is a novel manufacturing process for the production of forged hybrid components. In contrast to components made of mono-materials, hybrid components can be adapted to the respective loads by combining ...